Tools You Will Need; Mounting Space - Samsung ME16A4021AS Installation Instructions Manual

TOOLS YOU WILL NEED

#1 and #2 Phillips
screwdriver
Tin snips (for cutting
damper, if required)
Gloves
Level

MOUNTING SPACE

12˝ max.
16 ½˝
30˝ min.
30˝
5˝
SMH8165_XAA_DE68-03587A-10_EN.indd 7
Pencil Ruler or tape measure and
Scissors (to cut Electric drill with
template, if necessary)
Saw (saber, hole or
keyhole)
Duct and masking tape
NOTES:
Bottom edge of
•
cabinet needs to be 30˝
or more from the cooking
surface.
•
•
Backsplash
•
•
•
General information
straight edge
/ ˝, ½˝ and
3
16
⅝˝ drill bits
Stud finder or Hammer
(optional)
The space between the cabinets must be 30˝ wide and
free of obstructions.
This microwave oven is for installation over ranges up
to 36˝ wide.
If you are going to vent your microwave oven to the
outside, see Hood Exhaust Section for exhaust duct
preparation.
When installing the microwave oven beneath
smooth flat cabinets be careful to follow the
instructions on the top cabinet template for
power cord clearance.
Maximum cabinet depth above and beside the
unit is 12˝.
The dimensions provided are the minimum
required for mounting the microwave oven. Local
codes and practical use of the range will likely
require more than 13.5˝ shown between the range
and the bottom of the microwave.
7
Carpenter square (optional)
Filler blocks or scrap wood
pieces, if needed for top
cabinet spacing (used on
recessed bottom cabinet
installations only)
Safety goggles
6/19/2019 3:44:30 PM