ZS-BTY50/BTY52/BTY55
2-33. JOINT (Lch)
2 two tapping screws
(BV B2.6)
2 two tapping screws
(BV B2.6)
3 joint (Lch)
2 two tapping screws
(BV B2.6)
–
–
1 Cut the binding band (taiton).
tape (sub material)
Note 1: In reassembling, use new binding
binding band (taiton)
band (taiton) to fasten the clamp
same as before.
Note 2: Check the position of
the binding band (taiton).
OK
The knot at a tip is inside.
150 ± 5 mm
–
–
NG
The knot at a tip is outside.
Wire is outside.
–
–
–
–
29