ABB AWT420 Manual page 13

AW T4 2 0 U N I V E R S A L 4 - W I R E , D U A L- I N P U T T R A N S M I T T E R | C O M/A W T4 2 0/ E T H E R N E T- E N R E V. C
Once downloaded and installed, the software displays the
following screen:
Figure 18 FileZilla default screen
To setup a new connection, select: File > Site Manager... or type
Ctrl-S:
Figure 19 FileZilla Create a new connection
The following dialog is displayed:
Figure 20 FileZilla Connections dialog
To create a connection to a new AWT420 device select the
button New Site. A new entry is created in the My Sites folder.
Select a name for the new connection, in this example it will be
'AWT420':
Figure 21 FileZilla Connections dialog part 1
Now add the following information:
• In the Host field, type the IP Address of the new device
(10.0.0.1 in this example) and the credentials of the user
that will connect (advanced).
In this case, only the username is set, while the password is
asked for at each connection attempt (see Logon Type set
as 'Ask for password'). Also note it is not necessary to set
the Port value because the default FTP port (21) is used.
Figure 22 FileZilla Connections dialog part 2
13