Download Print this page

HAMPTON BAY ROTHLEY 51563 Use And Care Manual page 11

52-inch ceiling fan

Advertisement

Assembly - Hanging the Fan (continued)
6
Mounting the fan-motor assembly
(close-to-ceiling mount)
WARNING: The locking slots of ceiling canopy are provided only
as an aid to mounting. Do not leave the fan assembly unattended
until all four canopy screws are engaged and firmly tightened.
Carefully unhook the fan from the mounting bracket (A) and
align the locking slots of the ceiling canopy (C) with the two
screws (II) in the mounting bracket (A). Push up to engage the
slots and turn clockwise to lock in place. Immediately tighten
the two mounting screws firmly.
Install the two mounting screws (saved from Assembly Step 1
"Prepairing for mounting" into the holes in the canopy (C) and
tighten firmly.
You may now proceed to attaching the fan blades.
Assembly - Attaching the Fan Blades
1
Fastening the blade brackets to
the motor
WARNING: Remove the rubber motor stops on the bottom of
the fan before installing the blades or testing the motor.
NOTE: Your fan features revolutionary advancements for quick
and easy blade installation. Including an alignment post and
captive blade bracket screws.
NOTE: Your fan blades are reversible. Select the blade side finish
which best accentuates your decor.
Fasten the blade brackets (G) to the fan-motor assembly
(D) by inserting the alignment post into the slot on the
bottom of the motor and tightening the pre-installed blade
bracket screws.
Repeat this step for the remaining blade assemblies.
A
11
Please contact 1-855-HD-HAMPTON for further assistance.
II
D
D
G
HAMPTONBAY.COM

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Rothley 5156452-mln