Basic Recording
Playing back a tape on the CAMCORDER
You can monitor the playback picture on the Viewfinder.
Make sure that the battery pack is in place.
1. Hold down the tab of the power switch and push the switch to
PLAYER mode.
2. Insert the tape you have just recorded.
3. Make sure that STOP is displayed in the OSD.
4. Press the
(REW) button to rewind the tape to the beginning.
To stop REWIND, press the
Camcorder stops automatically after rewinding.
5. Press the
(PLAY/STILL) button to start playback.
You can see the video you recorded in the Viewfinder.
To stop the PLAY operation, press the
Note: You can also monitor the picture on a TV screen,
after connecting the camcorder to a TV or VCR. (see page 51)
(STOP) button.
(STOP) button.
ENGLISH
1
PLAYER
2
PUSH
3
STOP
4
STOP
REW
5
PLAY/
STOP
STILL
29