Install The Control Panel - Human Touch Perfect Chair Comfort PC-420 Use & Care Manual

put it together
NOTE: The illustrations in this section show a PC-600/610. If you are installing the upholstery package
on a PC-420 it will look different underneath the chair and on the left-hand armrest.

Install the control panel

1. Remove the six screws taped to the underside of the left-hand armrest cap.
2. PC-600/610: Note the shape of the top of the recline controller panel and the matching shape of the
recline controller housing (Fig.1).
Recline controller housing
humantouch.com
Recline controller panel
Fig.1
6
3. PC-600/610: Place the housing into position on the left-hand armrest as shown (Fig.2).
4. PC-600/610: Make sure the matching shapes are tightly aligned to ensure that the knob is centered
in the housing.
5. Place the control panel into position on the armrest, above the chair arm as shown (Fig.3).
Recline controller housing
Fig.2
Fig.3
7