PC-086 Troubleshooting This Troubleshooting Guide walks you step-by-step through the diagnosis of PC-086 customer problems. It is important to follow these steps carefully, to ensure that the problem is diagnosed correctly, and therefore the appropriate repair action is taken. Getting Started To begin: 1.
Page 4
To Troubleshoot This Do the following: Issue The complex mechanism that enables the footrest to continue to fold inward after the chair is fully inclined creates a slight bump when My chair feels bumpy reclining, as it locks, and when inclining, when it when reclining unlocks.
Page 5
Electric Recline The Chair Recline/Incline Works Intermittently If your chair reclines/inclines intermittently, requiring you to unplug it from the wall outlet and plug it back in, be sure you are holding the lever in the recline or incline position for five seconds. It takes several seconds for the recline actuator to engage.
Page 6
The wave function does not work at all but you hear a normal humming noise from the air compressor. 1. Using the instructions for Replacing the Air Compressor as a reference, verify that the air hoses from the chair are connected to the air compressor.
Page 7
Loud popping or clunking sound when reclining This may indicate a known issue with an earlier version of the footrest rod and bracket, in which the rod popped upward in the bracket toward the end of the reclining movement. This in no way affects the functioning of the chair.
Page 9
Human Touch, LLC 3030 Walnut Ave. Long Beach, CA 90807 www.humantouch.com...