Playback
Controlling Sound from the Speaker
✤
The Speaker works only in Player mode.
✤
When you use the LCD screen for playback, you will hear recorded sound from the built-in Speaker.
- Take the following steps to lower the volume or mute the sound while playing a tape on the Camcorder.
1. Set the Power switch to PLAYER.
2. Set the Mode switch to TAPE.
3. Press the
(PLAY/STILL) to play the tape.
4. Use the Menu selector to adjust the volume.
A volume level display will appear on the LCD screen.
I
Levels may be adjusted from anywhere between 00 to 19. You will not hear any sound when
the volume is set on 00.
I
If you close the LCD screen while playing, you will not hear sound from the speaker.
[ Notes ]
I
When the AV cable is connected to the Camcorder, you will not hear sound from the Built-In Speaker
and cannot adjust the volume.
I
The sound will return when you remove the connected AV cable from the jack of your Camcorder.
ENGLISH
3
4
√
0:46:00:11
SP
60min
[05]
...
†
69
69