Table of Contents
Advertisement
Date/Time
You can set the date and time to display on the LCD screen.
• Before you use the "Date/Time" function, you must set the date and time. page 29
Settings
Off
Current date and time information is not displayed.
Date
Displays the current date.
Displays the current time.
Time
Date&Time Displays the current date and time.
• The date/time will read "JAN/01/2008 12:00 AM" in the following conditions.
- If a movie or photo recording was made before setting the date/time in the DVD camcorder.
- When the button type battery for internal clock becomes weak or dead.
LCD Brightness
You can adjust the brightness of the LCD screen to compensate for ambient lighting conditions.
Moving the Joystick right will brighten the screen whereas moving it left will darken the screen.
• A brighter LCD screen setting consumes more battery power.
• You can adjust the LCD brightness from 0 to 35 when the ambient lighting is too
bright and the monitor is hard to see.
• LCD Brightness does not affect the brightness of images to be stored.
LCD Color
You can adjust the LCD color from 0 to 35.
When you set color range, the higher the figure is, the brighter the LCD screen will be.
Contents
On-screen display
None
JAN/01/2008
12:00 AM
JAN/01/2008 12:00 AM
STBY
0:00:00 [30 min]
LCD Brightness
18
Exit
Adjust
Select
MENU
STBY
0:00:00 [30 min]
LCD Color
18
Exit
Adjust
Select
MENU
English _79
Hide quick links:
Advertisement
Table of Contents
