ADTRAN NetVanta 3000 Series Hardware Installation Manual page 41

NetVanta 3000 Series Hardware Installation Guide
NetVanta 3448 Rear Panel Interfaces
SLOT 1 NET/DBU Option Slot
The
SLOT 1 NET/DBU
modules are described in the section Option Modules on page 43.
PoE (available Q4 2006)
The NetVanta 3448 has a 48 VDC port on the rear panel to provide the voltage required for Power over
Ethernet (PoE) applications. Note that the NetVanta 3448 itself cannot be powered by this port.
8 Switch Port Interfaces
Ports 1 through 8 are RJ-45 connectors used to access the fully managed 10/100BaseT Ethernet switch.
10/100BaseT Ethernet Interfaces
The Ethernet ports (
CONSOLE Interface
The interface is an EIA-232 serial port (DCE) which provides for local management and
CONSOLE
configuration (via a DB-9 female connector).
Connection directly to an external modem requires a cross-over cable.
Power Connection
All of the 1U-high products have universal power supplies and are shipped with the appropriate cable.
Please refer to Supplying Power to the Unit on page 66 for connection details.
61200860L1-34L
option slot supports various NIM plug-in option modules. These option
and ) are RJ-45 connectors.
ETH 0/1 ETH 0/2
Copyright © 2006 ADTRAN, Inc.
OVERVIEW
41