FIP FLS M9.50 Series Manual page 13

Digital outputs (1 RELAY, 1 SSR, 2 SSR) can be set in the following way:
TWO STAGE SHUTDOWN (green backlight) - (icon reports TWO)
Relay
0 %
ON
OUT 2 Option Relay
OFF
ON
OUT1 Batch Relay
OFF
Batch
OVERRUN ALARM (red backlight) - (icon reports OVR)
Relay
0 %
Status
ON
OUT 2 Option Relay
OFF
ON
OUT1 Batch Relay
OFF
Batch
Start
SOURCE SOLUTION VOLUME WARNING (icon reports SSW)
The Source Solution Volume is the total volume of the main container from
which system doses solution. Operator can set a warning (Source Solution
Volume Warning) related to a critical remaining volume. Source Solution
Warning doesn't stop the running Batch. At the end of the last Batch, monitor
has to be reset locally (no remote reset allowed).
NO SIGNAL ALARM (red backlight) - (icon reports NOS)
No flow detected during batch operation after a set timing period.
90 % 100 %
Time
100 %
Overrun
Volume
Volume
13