Output Mode - FIP FLS M9.50 Series Manual

OUTPUT MODE

The M9.50 Batch Controller features 2 solid state relays and 2 mechanical
relays. 2 RELAY is dedicated only for managing of batch system.
PROCEDURE FOR OUTPUTS SETTING
- go to the "Options" menu
- enter into the "Outputs activation" sub menu
- enable output(s)
- go to the "Outputs" menu
- set the operating mode for each enabled output
BATCH BATCH
0.000 0.000
L/s 10.000 10.000
BATCH BATCH
ENTER TO START
Monitor without digital
output activated
12
BATCH BATCH
0.000 0.000
L
L/s 10.000 10.000
L
BATCH BATCH
ENTER TO START
In case a digital output
is enabled, a icon will
appear
3 OFF 3 OFF
BATCH BATCH
0.000 0.000
L
L/s 10.000 10.000
L
BATCH BATCH
ENTER TO START
In case a digital output
is set, icon reports the
operating mode
3 OVR 3 OVR BATCH BATCH
11.094 11.094
L
L/s
L
OVERRUN ALARM OVERRUN ALARM
ESC TO RETURN
In case set digital
output is activated, the
icon will turn to black
(display turns green in
case output is set to
manage an external
device, red to indicate
a activated output as
alarm)
3 OVR
L