Furuno TZT2BB Instructions Manual page 9

7 PONTS/ROUTE Short press: A point is entered at the cursor position.
Long press: A route is created from the cursor position.
8 CURSOR The cusor can be moved.
9 Left Click Clicking the left-click key pops up a contextual menu or select a menu item.
10 Right Click The righ-click key activates the Function Gesture.
11 Edge Swipe The Edge Swipe function is activated: Press this key and press left/right/top/bottom arrows on
the CURSOR key to activate one of the Edge Swipe functions.
12 CTRL An operational screen is switched from one to another when multiple screens are connected to
the TZT2BB or multiple TZTL12F/15F and TZT2BB are networked.
13 CANCEL/MOB Short press: Current operation is cancelled.
Long press: An MOB point is entered.
14 HOME/BRILL Short press: The HOME page opens.
Long press: The Brilliance control window opens.
15 MENU The Settings page opens.
16 GAIN/TX Short press: Gain/Sea/Rain of Radar and Gain of Fish Finder are adjusted in combination with the
RotoKey™.
Long press: Radar or Fish Finder is set to TX or STBY.
17 EVENT An event is entered to the own ship position.
Note:
The TZTL12F/15F will also be compatible with the MCU-005 from the version 6.01 or later software.
3.3. What Can You Do with a Mouse/Trackball with Wheel?
When the TZT2BB is connected with a generic HID-mouse (USB mouse) or a trackball that has a wheel, each component
works as follows.
Components
1
3
1. Wheel
2. Left-click
3. Right-click
4
2
(Sample shot: LTSX50
4. Trackball
from NSI, Belgium)
Acts as the RotoKey™ of MCU-005 and rotary knob of MCU-004.
(1) Rotate to zoom in/out
(2) Push to [ENT]
(3) Select menu or contextual menu items
Single tap, drag/scroll with trackball
Same as left-click
Select a spot to be tapped
Drag/scroll with left-click
Functions
9