Huawei NE05E Series Quick Installation Manual page 26

2
AC/DC power system (ETP4830-4815AF power system)
•To ensure that the power supply of the equipment is not interrupted, you can also connect the device to batteries.
Then, if the mains supply is interrupted, the device can be powered by batteries.
•A storage battery array consists of four 12 V -40 Ah storage batteries. The dimensions of each storage battery are 197
mm (W) x 165 mm (D) x 170 mm (H).
•The positive and negative of the NE are connected to the negative and positive of the ETP4830-4815AF respectively,
and the positive and negative of the storage battery are connected to the positive and negative of the ETP4830-
4815AF respectively.
•The BOM number of the power cable for the ETP4830-4815AF is 04042957. Use the power cable (BOM number:
04042957) to connect the NE08E-S6 and ETP4830-4815AF for example.
(1) One end of the power cable (BOM number 04042957) has 4 pins. Connect this end to the output interface of load
on the right of the ETP4830-4815AF.
(2) Remove the red-and-black power terminal (BOM number 14180253) of the NE08E-S6 power cable.
(3) Insert the other end of the power cable (BOM number 04042957) into the red-and-black power terminal (BOM
number 14180253) and connect this terminal to the power interface of the NE08E-S6.
Connecting the NE to the ETP4830-4815AF and storage battery.
NE08E-S6
NE05E-SI
25