Before Ironing; Steam Ironing; Filling The Water Tank - Rowenta DA1510 Manual

1103903520 - DA1510:Mise en page 1
DESCRIPTION
1.
Voltage selector
(120/240 V)
2.
Temperature control
3.
Steam switch
4.
High precision tip

BEFORE IRONING

Remove the sticker on the soleplate
Adjust the voltage selector.
• Adjust the iron to correct voltage for
your location, using a sharp object.
If the voltage selected is 120 V, the iron
will operate at 100 to 120 V.
If it is set at 240 V, the iron will operate
at 200 to 240 V.
Note!
If necessary, check that you are using an adapter which meets the
safety requirements of the country you are in.
Put the handle into the ironing position.
• Press the release button on the`
rear side and raise the handle
until it locks into position.
• For storing proceed in the same
way to close the handle.

STEAM IRONING

Filling the water tank

NO
OK
24/09/08 14:45 Page 3
5.
Microsteam200 soleplate
6.
Handle water tank
7.
Water filling inlet
8.
Burst of steam button
9.
Handle release
NO