Installation Checkout - Kohler K-419 Installation Manual

To Shower Outlet
Hose Nut
Handshower Hose
1. Install the Handshower Hose
Run cold and hot water through the shower outlet to flush out
dirt and debris.
Insert the screen washer into the end of the inlet of the
handshower.
Thread the hose collar onto the inlet.
Thread the hose nut to the shower outlet.
Wrench tighten the hose nut to the shower outlet. Do not
overtighten.

2. Installation Checkout

Turn on the shower valve (not shown).
Check for leaks at each end of the handshower hose and the inlet
of the handshower. Make any adjustments as needed.
If applicable to your model, rotate the outer ring of the
handshower to verify smooth operation of the spray options.
Turn off the shower valve.
1044525-2-H
Inlet
Handshower
Screen Washer
Hose Collar
4
Outer
Ring
Kohler Co.