Important Instructions; Tools And Materials; Before You Begin - Kohler K-419 Installation Manual

IMPORTANT INSTRUCTIONS

CAUTION: Risk of scalding. Kohler low-flow showerheads/
handshowers are designed for use with compatible Kohler valves.
When installing a low-flow product to an existing showering
system, verify compatibility before showering. Do not use this
Kohler low-flow product with a shower valve that allows the water
temperature to become too hot when other plumbing products are
used.
Prior to using your shower, verify your new showerhead/
handshower is compatible with your shower valve (located behind
the wall) by performing the following steps:
While standing outside the shower, turn on the shower valve. Do
not step into the shower.
Adjust the water to your typical showering temperature.
Have someone flush the nearest toilet.
With your hand, carefully check the water temperature, from the
showerhead/handshower while the toilet is refilling.
If the water becomes significantly hotter, you will need to either
replace the shower valve with a compatible Kohler valve or
return your showerhead/ handshower.

Tools and Materials

Before You Begin

Observe all local plumbing and building codes.
The appearance of the handshower may differ from the
illustration. The instructions still apply.
1044525-2-H
Adjustable
Wrench
2 Kohler Co.