Table of Contents
Advertisement
Available languages
Available languages
Handshower
Head
2. Installation Checkout
Complete the installation of the valve, valve trim and any other
components according to the instructions packed with the
product.
Ensure all connections are tight.
Open the drain.
Turn on the main water supply and check for leaks. Repair as
needed.
Open both hot and cold valves and run water through the spout
(if installed) to remove debris. Check for leaks.
Check the handshower for smooth operation.
Turn the valves to the closed position.
Kohler Co.
Outer
Ring
5
1016116-2-D
Advertisement
Table of Contents
