Camtree MB-20 Assembly Manual page 2

Matte Box Setup

Insert french flag to the top of Matte Box and
tighten it with screws. Using the same
approach, insert side flags into matte box
and tighten the screws.

Attach knicker on conversion ring, then
attach ring with conversion ring holder and
tighten the knot.

You can easily insert filter holders as shown
in the image.

Pulling the knob upwards releases the MB-20
Matte Box allowing it to easily swing away
from the camera.
NOTE: The filter holder supports the use of 4x4" square filters, kit includes 2pcs of filter holders, one is
rotating 180° and another is non-rotating.
YOUR MB-20 SWING AWAY WIDE ANGLE MATTE BOX
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
2