Echelon Row Service Manual page 8

Diagnostic procedures for power on
Point A Screws of front and rear
tube
Point B Screws of foot rest
Point C Monorail
Point D Mesh belt
Point E Adjusting frame of
phone holder
Point F Phone holder lock slot
Point G Axle of phone holder arm
•Step 1:
Step 2:
Swap to another power socket, and
check again as last step 1.
Yes
Still not power on
Need to be evaluated case by
case.
Please provide
1. Product (Bluetooth) Serial
number
2. Video and photo for further
study.
Check if M & L are connected properly, and power switch on as figure shown.
Yes
Power on
Case Closed
Point H Screw
Point I Adjusting screw
Point J Wheels
Point K Tension controller
Point M Plug in power socket
Point N Bluetooth light
Point L Plug with rowing
machine
No
Reconfirm if M & L are properly
connected the power switch is turned
on as figure shown .
Hearing a beep sound from Tension
controller (Point K) indicates the
power is on. The Bluetooth light (Point
N) starts flashing.
Still not power on
Power on
Case Closed