Echelon Row Service Manual page 5

Step 7. Place the rail onto rail
bracket.
Step 9. Tighten screws with hex
key.
Step 11. Tighten screws with hex
key.
Step 8. Place the four screws
(No.5) into rail and hand tighten.
ANGLE AWAY
FROM ROW
Step 10. Align front foot with
screw holes on the rail and hand
tighten screws (No.8) into the
foot.
Step 12. Align the right foot
carriage with the screw holes on
the body of the rower and hand
tighten the three screws.