Echelon Row Service Manual page 6

Step 13. Tighten screws with hex
key. Repeat with left foot
carriage.
Step 15. Toggle the power switch, as
shown above.
Step 17. To lower the rail, press
down the foot pedal at the joint
and lower the rail gently to the
ground.
Step 14. Connect the power cord.
Step 16. Route the power cable
through the cable routing
clips legs, as shown above.
Step 18.
To lock into place, pull up on
this handle until you hear a
click. Once you hear the click,
the rower is safe to use.