Removals And Replacements - IBM PS/2 80 Hardware Maintenance Reference

8.0 Removals and Replacements

The arrows in the removals and replacements section show the direction of
movement to remove a FRU, to turn a screw, or to press a tab to release
the FRU. The arrows are marked in numeric order to show the correct
sequence of removal.
When other FRUs must be removed prior to removing the failing FRU, they
are listed at the top of the page.
FRU listed, remove the FRU, and then continue with the removal of the
failing FRU.
To replace a FRU, reverse the removal procedure and follow any notes that
pertain to replacement.
arrangement information.
CAUTION:
Before removing any field replaceable unit (FRU), power-off the system,
unplug all power cords from electrical outlets, and disconnect any
interconnecting cables.
Warning: The system board, adapters, memory modules, and the math
coprocessor are sensitive to, and can be damaged by, electrostatic
discharge. Establish personal grounding by touching a ground point with
one hand before touching these units.
Note: An electrostatic discharge (ESD) strap may be used to establish
personal grounding.
Subtopics
8.1 1005 Cover
8.2 1010 Cover Lock
8.3 1015 80386 System-Board Memory-Expansion Kit
8.4 1020 Adapters
8.5 1025 80386 Memory Expansion Kit
8.6 1030 Math Coprocessor
8.7 1035 Battery and Speaker Assembly
8.8 1040 Feet
8.9 1045 Front Bezel
8.10 1050 Carrying Handle
8.11 1055 Power Supply
8.12 1060 Diskette Drive
8.13 1065 Diskette-Drive Cable Retainer
8.14 1070 Diskette-Drive Support Structure
8.15 1075 Fixed Disk Drive (Front Bay)
8.16 1080 Fixed Disk Drive (Rear Bay)
8.17 1085 Fixed-Disk-Drive Bracket
8.18 1090 Fixed-Disk-Drive Support Structure (SCSI Drives)
8.19 1095 System Board
8.20 1100 Fixed-Disk-Drive Support-Structure Bracket
IBM PS/2 Model 80 HMR
Removals and Replacements
Go to the removal procedure for each
See "Locations" for internal cable connection and
(SCSI Drives)
¦ Copyright IBM Corp. 1990
8.0 - 1