2.3 Terminators
Diskette Drives:
do not use or require terminators.
Fixed Disk Drives:
one or more cables are used to connect the fixed-disk
adapters to the fixed disk drives.
the cable must have a terminator.
The location, quantity, and appearance of the terminator may vary from
drive to drive.
An identification label or tag (usually "T-RES") is
attached to the terminator for easy identification.
Note:
For additional information, see "SCSI Devices" in the "Options and
Adapters (Micro Channel)" section of this manual.
IBM PS/2 Model 80 HMR
Terminators
For each cable used, the last drive on
¦ Copyright IBM Corp. 1990
2.3 - 1