Lagrange Barbapapa Manual page 46

FIRST USE AND DAILY OPERATION
FIRST USE
Ensure that the on/off switch is in the off (
*
the appliance is unplugged.
Fit the cup onto the appliance spindle by aligning the tabs on
*
the spindle with the slots on the cup attachment (see Figure
Fit the head onto the motor assembly (see Figure
*
it counterclockwise (see Figure
the lock mouldings on the motor assembly. To check whether
the plastic container is sitting properly, you should be able to lift
the entire appliance holding it by the head without the motor
assembly coming loose.
1
) position and that
0
) and then turn
2
3 ) until the feet come up against
2
3
START-UP AND OPERATION
Before starting up the appliance, take out a paper cone (delivered
*
with your appliance or you can make your own as required).
To make your own cones: Take a thick piece of A
*
it diagonally in the shape of a cone. Tape the cone together using
adhesive tape (see Figure
Ensure that the on/off switch is in the off (
*
).
1
cotton candy machine on a flat surface to which the suction cups
will stick readily. Press down moderately on the appliance to make
the rubber suction cups stick.
Plug in the appliance.
*
Move the switch to the on (
*
running empty for at least
Turn off the appliance by moving the switch to the off (
*
and wait until the cup has stopped spinning.
Fill the measuring scoop with powdered sugar and pour the sugar
*
into the centre of the cup.
Turn on the appliance. The cup will start spinning. After a few
*
minutes, candy floss will begin to appear. Wrap the floss around
the cone. To do this, hold the cone upright by the small tapered
end (see Figure
the pan. As soon as you get the floss started, begin holding the
cone horizontally (see Figure
head to twirl floss onto the cone until no more floss is coming
out of the cup.
46
4 ).
) position. Place the
0
) position and leave the appliance
1
5 minutes to preheat it.
) and turn it slowly while also moving it around
5
6 ), continuing to move it around the
paper and roll
4
) position
0