Altimeter Test And Calibration Procedure; Display Mode And Baro Setting - uAvionix AV-30-C Instructions For Continued Airworthiness

7.9 Altimeter Test and Calibration Procedure

Altimeter calibration must be done in accordance with 14 CFR Part
91.411 Altimeter system and altitude reporting equipment tests and
inspections.
User interface control and operation required to enter and navigate the
maintenance mode is provided here.
For a full description of the user interface, refer to document AV-30-C,
Pilots Guide.

7.9.1 Display Mode and Baro Setting

For these purposes, the user interface must be configured to show
altitude. If altitude is not configured for display, refer to AV-30-C
Pilots Guide for procedures to configure altitude to be shown.
UAV-1004045-001 AV-30-C ICA
The baro setting must be set to 29.92 for these tests.
15 Revision A