Related Manuals for thermital BPS Series
Summary of Contents for thermital BPS Series
- Page 1 INSTRUCTIONS FOR THE INSTALLER AND FOR THE TECHNICAL ASSISTANCE CENTRE SOLAR STORAGE CYLINDER...
- Page 2 And this is particularly the case if the storage cylinder is entrusted to a THERMITAL Technical Assistance Centre which is specifically capable of carrying out routine maintenance, to keep it running at maximum efficiency, with low running costs and which has original spare parts if required.
-
Page 3: Table Of Contents
GENERAL WARNINGS GENERAL General warnings page 4 Basic safety rules “ Description of the appliance “ Identification “ Structure “ Water circuit “ Technical data “ INSTALLER Receiving the product page 9 Handling “ Assembly of the insulation (BPS 2000 e 3000) “... -
Page 4: General Warnings
THERMITAL in this instruction manual, and that it conforms to all applicable laws and standards. This instruction manual is an integral part of the product. -
Page 5: Description Of The Appliance
DESCRIPTION OF THE APPLIANCE GENERAL WARNINGS The solar storage cylinders with a double coil and a - the regulation of the connections to various heights for capacity of 1500 and 2000 litres, can be integrated into employing various types of heat generators, without solar systems for producing domestic hot water. -
Page 6: Structure
6 - Flange cover circuit, see the instructions for assembling the 7 - Lower coil solar collector and the THERMITAL operation 8 - Polyurethane insulation and maintenance manual of the storage system. 9 - Upper coil... -
Page 7: Technical Data
GENERAL WARNINGS TECHNICAL DATA DESCRIPTION BPS SOL 1500 HT BPS SOL 2000 HT Type of storage cylinder Vitrified Storage cylinder layout Vertical Heat exchanger layout Vertical Storage cylinder capacity 1390 1950 Useful non-solar volume (Vbu) Diameter with insulation 1200 1300 Diameter of storage cylinder without insulation 1000 1100... - Page 8 TOP COIL Pressure drop Mod. 2000 Mod. 1500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 FLOW RATE (l/h) PORTATA (l/h) BOTTOM COIL Pressure drops Mod. 2000 Mod. 1500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000...
-
Page 9: Receiving The Product
RECEIVING THE PRODUCT The following material is supplied in a plastic envelope The solar storage cylinders BPS are supplied in a single inside the package: package, protected by a nylon bag and put on wood - Instruction booklet pallets. - Label with bar code - Hydraulic test certificate. -
Page 10: Assembly Of The Insulation (Bps 2000 E 3000)
ASSEMBLY OF THE INSULATION (BPS SOL 2000 HT) Once the tank is positioned in its place in the installation Having completed the assembly, attach the serial room, the insulation and the elements completing the number, the technical data label and the product solar storage cylinder can be assembled. -
Page 11: Hydraulic Connections
Psc2 Psc1 of the water flow. Moreover, they can be easily integra- ted into THERMITAL solar equipment which include solar collectors, the fastening system, the hydraulic unit, the expansion tank and the ther- mostatic mixer valve. -
Page 12: First Commissioning Preparation
FIRST COMMISSIONING PREPARATION Before the start-up and before testing the boiler, it is absolutely necessary to check that: - The water supply taps of the domestic water circuit are open - The water connections to the respective boiler and to the water unit of the solar equipment have been carried out correctly - The procedure for washing and filling up of the solar... -
Page 13: Deactivation For Long Periods
Remember that the maintenance of the storage cylinder, can be carried out by the THERMITAL Technical Assistance Centre or else by qualified professional personnel and should take place at least once a year. - Page 14 CLEANING THE STORAGE CYLINDER AND DISMANTLING THE INTERNAL COMPONENTS OUTSIDE Cleaning the cover of the storage cylinder should be carried out with damp cloths and water and soap. In the case of stubborn stains dampen the cloth with a mixture of 50% water and methylated spirit or with specific pro- ducts for the marks.
- Page 15 NOTE...
- Page 16 RIELLO S.p.A. Via Ing. Pilade Riello, 7 37045 - Legnago (VR) www.thermital.it The manufacturer strives to continuously improve all products. Appearance, dimensions, technical specifications, standard equipment and accessories are therefore liable to modification without notice.
Need help?
Do you have a question about the BPS Series and is the answer not in the manual?
Questions and answers