thermital BPS SOL 1500 HT Instructions For The Installer And For The Technical Assistance Centre
Solar storage cylinder
Hide thumbs
Also See for BPS SOL 1500 HT:
Related Manuals for thermital BPS SOL 1500 HT
Summary of Contents for thermital BPS SOL 1500 HT
- Page 1 INSTRUCTIONS FOR THE INSTALLER AND FOR THE TECHNICAL ASSISTANCE CENTRE SOLAR STORAGE CYLINDER...
- Page 2 And this is particularly the case if the storage cylinder is entrusted to a THERMITAL Technical Assistance Centre which is specifically capable of carrying out routine maintenance, to keep it running at maximum efficiency, with low running costs and which has original spare parts if required.
-
Page 3: Table Of Contents
GENERAL WARNINGS GENERAL General warnings page 4 Basic safety rules “ Description of the appliance “ Identification “ Structure “ Water circuit “ Technical data “ INSTALLER Receiving the product page 9 Handling “ Assembly of the insulation (BPS 2000 e 3000) “... -
Page 4: General Warnings
Technical the THERMITAL Agency that sold you the applian- Assistance Centre THERMITAL or else professio- nally qualified personnel. -
Page 5: Description Of The Appliance
- the inner covering, bacteriologically inert, to ensure regulator and they can easily be inserted into solar equipment where the THERMITAL boilers or thermal maximum hygiene of the water processed, to reduce systems act as auxiliary producers of heat. -
Page 6: Structure
6 - Flange cover circuit, see the instructions for assembling the 7 - Lower coil solar collector and the THERMITAL operation 8 - Polyurethane insulation and maintenance manual of the storage system. 9 - Upper coil... -
Page 7: Technical Data
GENERAL WARNINGS TECHNICAL DATA DESCRIPTION BPS SOL 1500 HT BPS SOL 2000 HT Cylinder type Vitrified Cylinder layout Vertical Heat exchangers layout Vertical Cylinder diameter with insulation 1200 1300 Cylinder diameter without insulation 1000 1100 Height with insulation 2185 2470 Insulation thickness First magnesium anode (Ø... - Page 8 TOP COIL Pressure drop Mod. 2000 Mod. 1500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 FLOW RATE (l/h) PORTATA (l/h) BOTTOM COIL Pressure drops Mod. 2000 Mod. 1500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000...
-
Page 9: Receiving The Product
- Instruction booklet pallets. - Label with bar code - Hydraulic test certificate The BPS SOL 1500 HT model is provided with a foam The two magnesium anodes are supplied in a cardboard rubber shock absorbent protective band. box on the pallet. -
Page 10: Assembly Of The Insulation (Bps 2000 E 3000)
ASSEMBLY OF THE INSULATION (BPS SOL 2000 HT) Once the tank is positioned in its place in the installation Having completed the assembly, attach the serial room, the insulation and the elements completing the number, the technical data label and the product solar storage cylinder can be assembled. -
Page 11: Hydraulic Connections
Moreover, they can be easily integra- ted into THERMITAL solar equipment which include solar collectors, the fastening system, the hydraulic unit, the expansion tank and the ther- mostatic mixer valve. - Page 12 Schematic diagram Uscita °C Ingresso Gruppo idraulico - Solar collector 10 - Discharge 19 - Mixer valve - Storage cylinder 11 - Expansion tank UAC - DHW outlet - Collector probe 12 - Circulator pump MC - Boiler outlet - Isolating valves 13 - Flow regulator RC - Boiler return - Non-return valve...
-
Page 13: First Commissioning Preparation
FIRST COMMISSIONING PREPARATION Before the start-up and before testing the boiler, it is absolutely necessary to check that: - The water supply taps of the domestic water circuit are open - The water connections to the respective boiler and to the water unit of the solar equipment have been carried out correctly - The procedure for washing and filling up of the solar... -
Page 14: Deactivation For Long Periods
Remember that the maintenance of the storage cylinder, can be carried out by the THERMITAL Technical Assistance Centre or else by qualified professional personnel and should take place at least once a year. - Page 15 CLEANING THE STORAGE CYLINDER AND DISMANTLING THE INTERNAL COMPONENTS OUTSIDE Cleaning the cover of the storage cylinder should be carried out with damp cloths and water and soap. In the case of stubborn stains dampen the cloth with a mixture of 50% water and methylated spirit or with specific pro- ducts for the marks.
- Page 16 Via Mussa, 20 Z.I. - 35017 Piombino Dese (PD) - Italy Tel. 049.9323911 - Fax 049.9323972 - www.thermital.com - email: info@thermital.it Since the Company is constantly improving its range of products, the appearance and dimensions, the technical data, the equipment and accessories,...
Need help?
Do you have a question about the BPS SOL 1500 HT and is the answer not in the manual?
Questions and answers