Inspection; Placement Of Equipment - Qsonica MICROSON XL 2000 Operator's Manual

B.

Inspection

Your new Microson
carefully packed before leaving the factory. Prior to unpacking, carefully inspect the shipping
carton for any evidence of damage. Claims for loss or damage sustained in transit must be
made with the shipping company.
Unpack the unit from its shipping carton and check the contents against the packing list. Before
disposing of the packing material, check it carefully for small items. Report any missing
components to Qsonica immediately.
Visually inspect all external controls, indicators, and surfaces to detect any damage in transit. If
damage has occurred, contact your carrier within 48 hours of delivery date. DO NOT
OPERATE DAMAGED EQUIPMENT. Retain all packing material for future shipment.
C.

Placement of Equipment

A built in fan positioned at the back of the unit draws in cool air from the room to provide
radiant and convectional cooling of the internal components. Therefore, DO NOT BLOCK
THE FAN INLET. Position the generator so that air flows freely around the entire case.
Ultrasonic Liquid Processor was thoroughly inspected, tested and
8