Arming And Leaving With Others Staying - ADT EZ Using Manual

A R M I N G AN D L E AV I N G W I T H O T H E R S S T A Y I N G
If you are arming and leaving with other family members remaining home:
1 Check the EZ Touchpad indicators. The green
READY
2 Press the STAY button.
STAY will begin to flash, indicating the 60 second exit delay period.
STAY
3 Open the door and exit.
4 Lock the deadbolt from the outside to arm the system.
that the system is ready to arm.
If the green READY light is BLINKING, this indicates that a zone is faulted. The READY light is blinking out the zone
number of the open zone. Count the flashes and look at your zone list to see which zone is open and secure it (close
the door or window, etc.). If you cannot immediately secure the zone, it may be bypassed (see page 7).
If the green READY light is OFF, the optional second deadbolt is not locked. If there are two deadbolts in the system,
the other deadbolt must be locked before the system can be armed. Go to the other dead bolt location and lock it.
If the deadbolt has not been locked within 60 seconds of pressing
revert back to a disarmed state.
light should be ON-STEADY, indicating
READY
STAY
, the system will
9