Garmin ECHOMAP ULTRA 100 Series Quick Start Manual page 2

Introduction
WARNING
See the Important Safety and Product Information guide in
the product box for product warnings and other important
information.
Front View
Automatic backlight sensor
Power key
Zoom keys
Shortcut keys
Touchscreen
2 microSD memory card slots; 32 GB max. card size
®
Connector View
POWER Power
12 PIN XDCR 12-pin transducer
LVS XDCR Panoptix LiveScope
™
NMEA 2000 NMEA 2000 network
®
NETWORK ECHOMAP network
Ground screw
Assigning a Shortcut Key
You can quickly open commonly used screens by
assigning a shortcut key. You can create a shortcut to
screens such as sonar screens and charts.
1
Open a page.
2
Hold a shortcut key, and select OK.
Inserting Memory Cards
You can use optional memory cards with the chartplotter.
Map cards allow you to view high-resolution satellite
imagery and aerial reference photos of ports, harbors,
marinas, and other points of interest. You can use blank
memory cards to record Garmin Quickdraw
mapping, record sonar (with a compatible transducer),
transfer data such as waypoints and routes to another
compatible chartplotter or a computer, and use the
ActiveCaptain app.
™
2
This device supports up to a 32 GB memory card,
formatted to FAT32.
1
2
3
4
Getting Started with the ActiveCaptain App
You can connect a mobile device to the ECHOMAP Ultra
device using the ActiveCaptain app. The app provides a
quick and easy way for you to interact with your
ECHOMAP Ultra device and complete such tasks as
sharing data, registering, updating the device software, and
receiving mobile device notifications.
1
2
LVS12 12-pin transducer
™
3
4
5
6
7
For more information about the ActiveCaptain app and
features, see the Owner's Manual at www.garmin.com
/manuals/echomap_ultra or watch a video at
www.garmin.com/ActiveCaptainVideo.
Acquiring GPS Satellite Signals
The device may need a clear view of the sky to acquire
Contours
™
satellite signals. The time and date are set automatically
based on the GPS position.
1
Open the access flap or door
chartplotter.
Insert the memory card .
Press the card in until it clicks.
Close the door.
Insert a memory card in one of the ECHOMAP Ultra
device's card slots.
Be sure the card is inserted each time you want to use
the ActiveCaptain feature.
Select ActiveCaptain > Set ActiveCaptain Card.
NOTICE
You might be prompted to format the memory card.
Formatting the card deletes all information saved on
the card. This includes any saved user data, such as
waypoints. Formatting the card is recommended, but
not required. Before formatting the card, you should
save the data from the memory card onto the device
internal memory.
From the ActiveCaptain page, select Menu > Wi-Fi
Setup > Wi-Fi Network > Wi-Fi > On.
Enter a name and password for this network.
From the application store on your mobile device,
install and open the ActiveCaptain app.
Bring the mobile device within 32 m (105 ft.) of the
ECHOMAP Ultra device.
From your mobile device settings, open the Wi‑Fi
connections page and connect to the Garmin
using the name and password you entered.
Turn on the device.
on the front of the
®
device,
®
Quick Start Manual