How Do I Add Devices To The Homewizard App; Adding A Wireless Switch - Smartwares HomeWizard Connect Kit Installation Instructions Manual

Table of Contents

Available languages

4 How do I add devices to the

HomeWizard app?

1 Place the wireless switch in the electrical outlet. A red LED lights up

permanently.

2 Keep the button on the wireless

switch pressed for 2 seconds and

then release the button.

Note! The LED should flash after

the button is released. If the LED

flashes during pressing the button

then the wireless switch cannot be

added.

22 Installation instructions – smarthome connect kit

3 Press any button on the left side of

the remote control. The switch is

now paired up with the remote

control.

Table of Contents

Chapters

Table of Contents

Do you have a question about the HomeWizard Connect Kit and is the answer not in the manual?

Hw001