Care And Service Of Your System; Terminology - GARDINER TECHNOLOGY GARDTEC 300 Series User Instructions

<iiARDTEC
350 users Manual
CARE AND SERVICE OF YOUR SYSTEM
User care of the system consists of occasionally wiping the control panel. Under no
circumstances should detergents or abrasives be used.
Opening the control panel or detectors will generate a tamper alarm and service
should be carried out by a qualified alarm engineer. It may be a condition of your insur-
ance policy that your alarm system is serviced on a regular basis. Please contact your
installation company for details of service.
TERMINOLOGY
User
Full Set
Part Set
Unsetting
Zone
Resetting
DAV Mode
Chime
Remo~e
Log
LED
P.A
Tamper
A person who will use the control panel (e.g turn the alarm on or off).
To turn all protected areas on ie to arm all areas.
To set the system leaving a group or groups of areas unprotected.
To turn off (disarm) the system .
An area protected by the alarm system.
To restore back to normal DAY mode display usually after an alarm
condition.
The alarm system is unset.
A chime zone that is activated will give an audible tone from the
control panel. It should be noted that chime zones need to be
programmed by the engineer. The chime function may be turned on
and off by the Master user.
The remove function allows the system to be set with individual
zones removed. This function is in addition to any Part Sets.
A history of events.
Light Emitting Diode (indicating lamp).
P.A (Personal Attack) is active 24 hours irrespective of the control
panel being set or unset. It may be activated by pressing keys 1 and
3 together on the control panel or activating a P .A button that has
been allocated to a zone by the engineer.
Monitored 24 hours a day will give an audible warning if activated.
Page 12
GARDTEC 350
users Manua1
INSTALLATION DETAILS
Company Name:-
Company Address:-
Company Tel No:-
Service Tel No:-
First Service Due Date:-
SERVICE RECORD
Service No Due Date Actual Date Engineers Sig
1
2
3
4
5
6
7
8
9
10
11
12
13
Page 13