Special Tools - ProGear Hendrickson HN FR Series Service Manual

SECTION 4

Special Tools

BAR PIN ADAPTER SET INSTALLATION TOOL
OTC Tool No. 1757
BAR PIN END BUSHING RECEIVING TOOL
17730-285
Pro Gear and Transmission • 906 W. Gore St. Orlando, FL 32805 • 1 (877) 776-4600 / (407) 872-1901 • parts@eprogear.com
Servicing bar pin end bushings used on HN FR equalizing beam suspensions
requires the use of special tooling. OTC's No. 1757 adapter set is used with
the beam removed from the truck, and in conjunction with OTC No. 51100
press plate and a 100-ton hydraulic shop press.
To order, contact OTC, 507.455.7000 or
visit: www.otctools.com for
an OTC distributor.
This shop made tool is designed to receive bar pin end bushing. Bushing tool
is made from cold rolled steel or equivalent. Drawing is for reference only.
Hendrickson does not supply this tool.
7
HN ® FR Series
Special Tools