Get Started; Control Panel - Blueair HealthProtect 7400 Series User Manual

Get started

Step 1
Open the filter door, pull out the main filter
and remove the protective wrapping.
See section Filters for more information regarding filter handling.
Plug into the power supply
Step 1
If your air purifier has
a removable power
cable, plug the cable
firmly into the power
cable socket on the
air purifier.
Note! For some markets, the air purifier is equipped with a fixed power cable due to
regulatory requirements.
Tip!
Store any excess cable length in the cable winder under the air purifier.
Connect to the Blueair app
Connecting the air purifier to the Blueair app allows you to control the air purifier remotely and
change the settings. The app adds additional functions to the air purifier.
Step 1
Download the Blueair app from the App
store or Google play.
Step 2
Put the main filter back into the air
purifier and close the filter door.
Step 2
Plug the power cable
into a grounded wall
outlet.
Step 3
Press the On/Off
button to turn the air
purifier on.
Step 2
Open the Blueair app and follow the
instructions to connect it to the air purifier.
10

Control panel

All HealthProtect™ models have controls, a filter indicator and air quality
information. The 40-models and the 70-models have additional indications for air quality
data. The 40-models have a display for particulate matter data. The 70-models have a
dynamic screen control, with additional functions for particles, gases (tVOC), temperature,
relative humidity and filter lifetime.
All HealthProtect™ models have a light sensor and will adjust the brightness of the control
panel based on the detected ambient light in the room.
Air quality data
Filter indicator
Controls
Air quality information
40-models
<
70-models
PM2.5
999
<
11
<
<