Blueair HealthProtect 7400 Series User Manual page 10

Particle data indicator
The air quality data for particles are indicated on the screen. Press the left or right arrow to
switch to the Particle data category page. The screen shows measured values for PM1, PM2.5
and PM10, with its related air quality information indicated in the status bar.
PM1
Category PM1
5
Value of 5 μg/m .
3
Status Excellent air quality.
PM10
Category PM10
55
Value of 55 μg/m .
3
Status Moderate air quality.
Temperature indicator
The room temperature is indicated on the screen. Press the left or right arrow to switch to
the Temperature category page.
17
Category Temperature
Value of 17 degrees Celsius/63 degrees Fahrenheit in the room.
˚C
Relative humidity indicator
The relative humidity of the room is indicated on the screen. Press the left or right arrow to
switch to the Relative humidity category page.
Category Relative humidity
36
Value of 36% in the room.
%
PM2.5
Category PM2.5
15
Value of 15 μg/m .
3
Status Good air quality.
Loading data
/No data available.
See the Blueair app for more information.
18
Gas data indicator
The air quality data for gases (tVOC) is indicated on the screen. Press the left or right arrow to
switch to the Gas data category page. The screen shows the different sensor readings of gases
over time.
Category Gas data
Value of air quality levels for gases (tVOC) in the room over time.
Status Excellent air quality.
Filter lifetime indicator
The remaining lifetime of the filter is indicated on the screen. Press the left or right arrow to
switch to the Filter lifetime category page. The air purifier will count down from 100% with a
new filter, and indicate when it is time to change filter.
Category Filter lifetime
90
Value of 90% left of the
%
filter.
Status bar counting down.
Category Filter lifetime
9
Value of 9% left of the
%
filter.
Status bar counting down.
19