Recording Voice; Mp3 Encoding - Samsung YPT5H Manual

Recording Voice

To move to other modes from the Voice mode,
refer to page 36 "Changing Mode".
To Record Voice
1
Press the REC button to start voice recording.
2
Press the REC button again to stop the recording and a
voice file is saved.
N N o o t t e e
The files are recorded in the order of V001,V002......,
and saved as WAV file in the VOICE folder after recording.
If the Memory is full, the Voice Recording is stopped automatically.
Voice Recording does not work in FM Mode or when the Line In cable is connected.
28

MP3 Encoding

To move to the other modes from LINE_ENC mode,
refer to page 36 "Changing Mode".
1
Connect the Audio Output port on the external audio source
(or the Line Out port) to the ENC port on the device with the Line cable.
2
Press the REC button to start MP3 encoding.
If the button is pressed, encoding is paused and if the
the encoding resumes.
3
If the REC button is pressed during encoding, the encoding stops and an
encoding file is created.
The files are encoded in the order of L001, L002....
and saved as MP3 file in LINE_ENC folder after encoding.
N o t e
N o t e
Bit Rates can be set within the range of 32Kbps~128Kbps.
Volume can be adjusted from level 0 to 10 while monitoring the Encoding.
N o t i c e
N o t i c e
Do not disconnect the Line cable during Encoding.
If the battery is not charged enough, encoding will not be done.
Adjust the volume of the external audio source to a suitable level and encode it.
If the volume level is extremely high, the sound quality may not be good.
button is pressed again,
29