Harken 3160 Instruction Sheet

3160/3161/3163/3164/3165/3166/3167/3172
N15W24983 Bluemound Rd., Pewaukee, WI 53072-4974 USA
Web: http://www.harken.com • Email: harken@harken.com
Strictly follow all instructions to avoid an accident, damage to
your vessel, personal injury or death. See www.harken.com/
manuals for additional safety information.
C B C A R S O N L Y R O L L O N C B T R A C K
Car
Big Boat
Note: Track not shown actual size
Part No.
3154, 3155, 3159 1
3156
Position car at end of track and gently roll on. Car should roll on easily, if not
check to make sure you are using CB track. Do not remove ball retaining
wires. Cars will not roll unless they have retaining clips.
I N S T R U C T I O N S H E E T
Big Boat CB Traveler Cars
Telephone: (262) 691-3320 • Fax: (262) 691-3008
Car Width
3 / " (85 mm)
3
8
A B
in mm in mm in mm
/ 32 / 19 1
1 3
4 4
1 / 32 2 / 57 1
1 1
4 4
Installing Traveler Car on Track
Removing Ball Bearings from CB Cars
3154/3155/3156/3159
C
3154, 3155
/ 42
5
8
/ 30
3
16
Position the car on edge
and gently push one ball
at a time from the center
of the retaining clip. Do
not remove the retaining
clip from the car!
Track
B
3159
A
3156
C