Advertisement
3D Image sensor
Product Name
6-3 Maintenance
Always turn off the power supply before maintenance, otherwise it could cause injuries or accidents.
1) Wipe the front panel with a soft paper towel to remove the dirt.
2) Do not apply any chemicals such as paint, benzine, aromatic liquid, pesticides etc., on the product.
6-4 Other Precautions
1) Please handle this product with extreme care. It may be damaged by shocks or a fall.
2) Please avoid applying pressure or impacts to the front panel or the lens that might deform the
product's shape, causing operating errors or reduced performance.
3) Operating errors can be caused by electric noise from static electricity, lightning, cell phone,
amateur radio, broadcasting offices etc...
4) This product does not have the USB2.0 authentication.
Use it only when the above -mentioned configuration and environments have been verified.
5) When you set the frame rate as 15fps, the embedded LED might be seen as blinking.
It is not abnormal.
6) The USB drivers, range image display software, library for application software development and
installation manual are copyrighted by Panasonic Corporation.
Moreover, Panasonic Corporation provides the software as is, with no warranty as to its functionality,
and disclaims any liability or responsibility for damage resulting from its use.
7) The following EMI noise levels are ensured.
・VCCI Class A conform
・FCC Class A conform
・CISPR22 Class A conform
8) Be careful to protect privacy when using the images captured with this product.
9) This device is for industrial use only. It can only fulfill its function, when it is installed with other
equipment. It must be installed by professional personal.
Jan.1
,2012
st
Issued on
Ｓｐｅｃｉｆｉｃａｔｉｏｎｓ
Model No.
EKL3106
Page:
Ver. 1.1
6
(1202101)
Advertisement
