Advertisement
5. Screw the Propane Cylinder clockwise into the gas tube as shown in Figure 5.
Hand tighten only. Do not cross thread. Use only a 16.4 oz (465g) cylinder with a
NO.800 connection. Do not use a 14.1 oz (400g) cylinder.
6. Install the Fire Bowl ( 207 ) on the base by inserting the three screw heads into
the holes on the top of the firepit base and press the burner bowl hard until the
bowel snaps into place, locking the fire bowl to the base as shown in Figure 6.
Press the
burner bowl
down onto
Base.
7. Pour the glass into the fire bowl. Spread the glass evenly in the bowl as
shown in Figure 7.
5
Figure 5
Figure 6
Figure 7.
Advertisement
