Voice Signal - Samsung SCH-a790 Series User Manual

Voice Signal

Voice Signal commands give you the power to launch
applications using your voice. Simply say a command at the
prompt to record memos, open the Phone Book, open the
browser, and more.
In standby mode, press and hold
1.
After a brief pause,
display and is pronounced through the speaker.
After the phone beeps, say the name of the command
2.
that you wish to perform. The Voice Signal commands
listed in the following table are available.
Command
Quick Dial
Digit Dial
Voice memo
Name Dial
Phone Book
Browser
More information on the commands listed in the previous
table is available in the following sections.
s/w XA16 h/w A790.05
"Say a Command
Function
Lets you dial a person by saying the name you've
recorded for that person. Before you can use Quick
Dial, you'll need to record the names that you wish
to use.
ets you dial any valid seven-digit or ten-digit
L
phone number by speaking the number natu-
rally, without pausing between digits.
Record voice memos for later playback. You can
also record the caller on the other end of the line
during a phone conversation.
Lets you dial any person in your Phone book by
pronouncing that person's name. It automatically
voice activates every contact in your Phone book
without the need to record or "train" names before
using them.
Lets you retrieve contact information for any per-
son in your Phone Book by pronouncing the name
of that person.
Opens the browser to the Verizon Wireless home
page.
1/18/04
.
" appears in the
Voice Signal
145