Once the card is securely inserted into the SIM slot,
3.
install the battery as outlined in the following section,
then turn the phone on.
Remove the SIM card
Use the same procedure for removing the SIM
card that was used to install the SIM card, only
in reverse.
Install the battery
This phone comes packaged with a partially charged
rechargeable standard Li-Ion battery and desktop charger.
Important! Although the phone can be used while the
battery is charging, the battery must be fully charged before
first use, otherwise you could damage the battery.
Insert the bottom end of the battery
1.
into the phone housing with the label
side down. The gold contacts on the
end of the battery should match up
with those on the phone.
Push the top end of the battery down
2.
until it snaps into place.
Remove the battery
Press and hold
1.
Pull the battery release latch toward
2.
the top of the phone. The top of the
battery should pop up.
Use your finger to lift the battery (top
3.
end first) up and away from the phone.
s/w XA16 h/w A790.05
to turn off the phone (if on).
1/18/04
Introduction
7