Table of Contents
Advertisement
Additional Programs
5. Scroll down to Unit and scroll right to
change the conversion unit, if
necessary.
The device displays the conversion
result.
Voice Signal
With Voice Signal, you can make calls,
retrieve contact information, launch
applications, and send text messages
with voice commands.
Use name dialling
1. In Standby mode, press [ ] → Tools
→ Voice Signal.
You will hear, "Say a command."
2. After a beep, say "Call" and then a
person's name stored in Contacts.
70
3. If there are similar names, the device
displays the 3 best candidates and
then recites the name and number
that most closely matches your
command.
4. If the name or number is not the one
you want, say "No," and then repeat
until you hear what you want.
5. When you hear the name you want,
say "Yes."
Search for contacts
1. In Standby mode, press [ ] → Tools
→ Voice Signal.
You will hear, "Say a command."
2. After a beep, say "Look up" and then
the full name of the contact card (first
name followed by the last name).
Advertisement
Table of Contents
