nEtWoRk SEttingS
2.
To add a new Route, click Ne
3.
Specify the following parameters:
•
Name – select the network type.
Name
•
Des
Destina
tination
host, subnet address, network address, or default route.
The destination for a default route is 0.0.0.0.
•
Netmask
Ne
tmask – enter the network mask. This is used in
conjunction with the destination to determine when a
route is used.
•
G G at atew
ewa a y y – enter the IP address of your Fios Router.
•
Metric
Me
tric – enter a measurement preference of the route.
Typically, the lowest metric is the most preferred route.
If multiple routes exist to a specifc destination network,
the route with the lowest metric is used.
4.
Click Apply
Apply to save changes.
tion - enter the destination IP of the destination
New r
w rout
oute e .