Bosch SCT 815 Unpacking & Assembly Instructions page 31

Uncrating & Assembling SCT 815
© Robert Bosch GmbH 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
29
29. Install plastic screws in the Tool Holder
at each end to prevent Prismatic
Reflector from sliding off.
Caution: Tilting the SCT 815 on its side
will cause the Prismatic Reflector to
slide, breaking off the plastic screws,
and allow the Prismatic Reflector to slide
off the Tool Holder onto the floor;
potentially and damaging the Prismatic
Reflector.