Installing The Rear Wheel - KTM 200 Duke US 2020 Owner's Manual

14.4

Installing the rear wheel

Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Warning
Danger of accidents There is no braking effect to start with at the rear brake after installing the rear
wheel.
–
Actuate the foot brake several times before going on a ride until you can feel a firm pressure point.
Main work
–
Check the rear hub damping rubber pieces.
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the rear wheel bearing.
–
Clean and grease shaft seal rings
of the spacers.
Long-life grease (
–
Clean and grease the thread of the wheel spindle and nut.
S00675-10 Long-life grease (
WHEELS, TIRES 14
(
1
and contact surfaces
p. 228)
p. 228)
p. 148)
A
145