Route To A Point Selected On The Map; Route To An Address - Navitel E500 User Manual

62 | USER MANUAL — QUICK START GUIDE

Route to a point selected on the map

You can have a route planned to a point, which can be found and marked on the map and then set as the destination, while
current position of the device, determined by the GPS system becomes the starting point. To plan a route press on the map to
mark the point, select "Cursor" [1] and then "Go!" [2]. The program will offer 3 alternative routes [3]. Select the appropriate
and press "Go!".
EN
Fig. 1

Route to an address

To have a route calculated to a point of a known address, press "Menu" in the bottom left corner of the screen [4] − "Find" [5] −
"By address" [6], then press "Select country" and start entering the name of a country [7]. Press the icon in the upper right part of
the screen to hide the keyboard. Select the country [8]. "Select city", "Select street"
if the previous fields were filled out [9]. When all information is entered the object will be shown in the screen [10]. Press "Go!".
The program will offer 3 route options from a current location to the indicated address [11]. Now you can follow the route [12].
Fig. 2
and «Select a building» become active only
Fig. 3