Waste Disposal; Troubleshooting - Honda SSBL Instruction Manual

7. Waste Disposal

For disposal, observe the standards and regulations of your region. If there is any question, contact your
servicing dealer.

8. Troubleshooting

In case of failure, follow the table below.
parts or fan.
Situation
Output is not Foreign objects are caught in
enough. the blower.
Throttle cable adjustment is
faulty
Engine concern.
Vibration is too Poor balance of attachment
large.
Improper-installation of
attachment
Looseness of connection of
attachment
Shaft tube is bent.
The blower does The shaft tube is broken.
not move even if
Gear has worn.
the engine speed
is increased.
Possible Cause Correction
Refer to "5.3.1 Removal of Foreign Objects."
Refer to the powerhead manual.
Refer to the powerhead manual.
Contact your servicing dealer.
Check the installed status.
Tighten attach nut.
Contact your servicing dealer.
Contact your servicing dealer.
Contact your servicing dealer.
Contact your servicing dealer.