Alfred DB1 Series Manual

Smart lock

Table of Contents

Download this manual

Connecting your Alfred Smart Lock with Google Home Assistant

What you Need to setup Google Home Assistant and your Alfred Smart Lock

1. Installed Alfred Smart Lock (DB1 or DB2 Series)

2. Installed Alfred Connect WIFI Integration System

3. Alfred Home App setup with Alfred Home

4. Google Home Assistant App on your iPhone or

Account

Android Device

Table of Contents

Do you have a question about the DB1 Series and is the answer not in the manual?

Page 1 Connecting your Alfred Smart Lock with Google Home Assistant What you Need to setup Google Home Assistant and your Alfred Smart Lock 1. Installed Alfred Smart Lock (DB1 or DB2 Series) 2. Installed Alfred Connect WIFI Integration System 3. Alfred Home App setup with Alfred Home 4.
Page 2 Step 1. Make sure your Alfred Connect is powered, connected to WIFI and already paired with your Alfred Smart Locks Step 2. Launch Google Assistant App on your mobile Step 3. Enter the Settings menu and look for the device...
Page 3 * Please note, if you make any changes to your Device names within the Alfred Home App, it is best to relink your Alfred account to Google Assistant so it can update with your new Device names for commands...
Page 4 * Please note, we suggest inputting a different pin code from what you use to unlock your Alfred Lock with. The pin code that is added into Google Home Assistant is used as a security protocol when asking Google Home to Unlock your device.
Page 5 You should now be able to control your Alfred Smart Locks using Google Home Assistant. Now that your Alfred Lock is succesfully linked to your Google Assistant you can do the following actions: Hey Google, Lock my Front Door Lock...
Page 6 Need to Update your Security Pin Code entered into Google Assistant? In order to update you security pin code you will need to unlink and relink your Alfred Account with your Google Assistant account. Follow these steps to start the unlink process 1.

Db2 series