Alfred DB1 Series Manual

Smart lock

Table of Contents

Download this manual

Connecting your Alfred Smart Lock with Amazon Alexa

What you Need to setup Amazon Alexa and your Alfred Smart Lock

1. Installed Alfred Smart Lock (DB1 or DB2 Series)

2. Installed Alfred Connect WIFI Integration System

3. Alfred Home App setup with Alfred Home Account

4. Alexa App on your iPhone or Android Device

Table of Contents

Do you have a question about the DB1 Series and is the answer not in the manual?

Page 1 Connecting your Alfred Smart Lock with Amazon Alexa What you Need to setup Amazon Alexa and your Alfred Smart Lock 1. Installed Alfred Smart Lock (DB1 or DB2 Series) 2. Installed Alfred Connect WIFI Integration System 3. Alfred Home App setup with Alfred Home Account...
Page 2 Step 1. Make sure your Alfred Connect is powered, connected to WIFI and already paired with your Alfred Smart Lock Step 2. Launch Amazon Alexa App on your mobile Step 3. Tap the "More" folder in the bottom right device...
Page 3 * Please note, if you make any changes to your Device names within the Alfred Home App, it is best to re- discover your Alfred devices within Amazon Alexa so it can update with your new Device name for commands...
Page 4 * Please note, we suggest inputting a different voice code pin from what you use to unlock your Alfred Lock with. The voice code that is added into Amazon Alexa is used as a security protocol when asking Alexa to Unlock your device. Any time you ask Alexa to "UNLOCK"...
Page 5 Step 9. You should now be able to control your Alfred Smart Locks using Amazon Alexa. Now that your Alfred Lock is succesfully linked to your Amazon Alexa you can do the following actions: Alexa, Lock my Front Door Lock...
Page 6 Need to Update your Voice Code entered into Amazon Alexa? Follow these steps: 1. Open Amazon Alexa app and go to your "Devices" Tab and select "Locks" 2. Select the Lock device you would like to change the voice code for 3.

Db2 series